Back to E-form Control Page

E-Form Change Control

Form Name : SE 05/04

Revision History

Revision Number

Date

Change

2.0

15/01/1998

Initial Release

2.1

15/05/1999

Layout changes for Filler 2.6

Licensee’s Reference cells added

Ctrl-? For cell help added

Issue number incremented

Adjacent anchorage result cells disabled for NB2,MD3,MD4,ME & NC, "Adjacent anchoarge?" label changed to a cell which becomes "Anchorage on seat?" for these vehicles

2.2

13/06/1999

MasterCheck cell changed to not show X if AdjacentAnchorage warning is "entries not required"

2.3

05/10/1999

Image changed from FORS to DoTRS, issue and revision numbers incremented, issue date updated.

MasterCheck cell changed to not show X if AdjacentAnchorage warning "Not required for MD3,MD4,ME,NB2 or NC category vehicles"

2.4

11/11/2000

Changed 2nd para Evidence summary clause no. to 12.3.1. Changed master X warning to ignore "If using ECE 14 responses not required" message above adjacent anchorage grid.

Changed anchorage test loads if ECE test to 3 levels based on vehicle category.

Turned off bells for third anchorage if Lap only.

Corrected error re same test- same load in anchorage 2 block 2.

2.5

24/01/2003

Update Departmental Logo.

2.6

31/10/2003

Bell for seat belt type was not coming on if cat-NC, Seat row =1 and seat number >1.

2.7

22/07/2005

Extensive changes to code for ECE testing, including only using two results columns per seating position for L/s instead of three and one instead of two for L, blanking unused result cells,amending the required loads including removing the upper limit. Amended downwards the adjacent anchorage load requirements in the “adjacent anchorage’ grid for rear facing seats. Warnings etc for Adjacent Anhchorage, Anchorage on Pillar and Permanent Structure disabled for heavy vehicles by Design or by test to cl 12. Permanent Structure test for lap/sah for heavy vehicles tested to Cl 5.1.1 added. Response for “Adjacent Anchorage” now dynamically switches to “Anchorage on Seat” for ECE 14 tests or heavy vehicles tested to cl 12.

2.8

20/03/2008

General tidy and update of form

2.9

30/01/2009

Increase TFId field size and make entry of 6 characters mandatory.

2.10

27/07/2012

Update Departmental Logo.

2.11

07/03/2014

Update Departmental Logo.